Home /  What We Do  / 10 Minute Concrete Mender

ROADWARE

10 Minute
Concrete Mender™

“It's thin, it gets in, and it won't pop out.”

A high penetration, two part hybrid urethane that combines with manufactured sand to form an instant polymer concrete. Cracks, spalls, joints and delaminations repaired permanently and back to traffic in 10 minutes. The only product of its kind that is PennDOT Bulletin 15 approved.

Do-it-yourself installation. Professional-grade results. An easy-to-use solution for contractors and facility maintenance teams.

PENNDOT BULLETIN 15

MADE IN USA

98% SOLIDS

DEVELOPED FOR NATO

NO DIMENSIONAL LIMITS

Roadware 10 Minute Concrete Mender product line: 5 gallon pails, 1 gallon kit, 600 ml cartridges, needle tips and dispensing gun

FLAGSHIP PRODUCT

10min

CURE AT 72°F

4,500psi

COMPRESSIVE W/ SAND

1,984psi

BOND STRENGTH ASTM 882

<9cps

VISCOSITY

98%

SOLIDS, NO SHRINKAGE

-20°F

INSTALL TEMPERATURE

OVERVIEW

What is 10 Minute
Concrete Mender?

10 Minute Concrete Mender is a structural polyurethane crack and spall repair material made by Roadware Incorporated. It is a two part hybrid urethane with a viscosity under 9 cps, thinner than water, so it soaks into the pore structure of the concrete instead of sitting on top of it. Roadware calls this Microdoweling™ action. The result is a seamless, permanent bond with no bond line to fail and no dimensional constraints on the repair.

Mixed with manufactured sand it forms a 4,500 psi polymer concrete with properties similar to the existing slab that stays pliable over time. Repairs can be blended, polished, painted or returned to traffic in 10 minutes at 72°F, and it will cure in freezers and on winter decks down to 20 below.

USES

Hairline cracks and larger where future movement is not anticipated

Spalls, pop outs and distressed joints in floors, decks and bridges

Rebonding delaminated topping slabs and overlays

Securing bolts, equipment and railings into concrete

Vertical repairs when combined with specified sand

Surface imperfections prior to coating, freezer and cold storage floors

Technical data

Cure time @ 72°F

10 minutes


Hardness @ 72°F

72 D


Compressive strength (with sand)

4,500 psi


Tensile strength

4,475 psi


Bond strength, ASTM 882-99

1,984 psi


Elongation

6%


Viscosity at application

<9 cps


Surface tension (Wilhelmy plate)

0.026 N/m


VOC (mixed)

5.5 g/l


Solids

98%


Mixing ratio

1:1


Cured color

Gray (also Off White, Safety Yellow)

Source: Roadware Incorporated technical data. Always read the SDS and instructions before use. For professional use only.

Features

Extremely low viscosity for deep penetration into concrete

Full 98% solids content with no shrinkage

Self mixed in the cartridge and delivered at the point of application. No pot mixing, no waste

Cures in 10 minutes at 72°F and rapidly in subzero environments

Excellent resistance to chemical attack

Very low odor. Safe for occupied indoor areas

Benefits

Long lasting repairs that handle harsh physical environments

Easy prep. A wire brush is all that is needed in most cases

No downtime. Ready for traffic in about 10 minutes

Transfers dynamic loads without fracture

Approved for PennDOT projects under Bulletin 15

Stocked in Pittsburgh. Ships nationwide

HOW IT WORKS

Microdoweling™ in three steps.

The reason a Mender repair does not pop out: it is not a patch on the surface. It is polymer locked into thousands of pores below it.

01

Prep and inject

Wire brush the crack or spall. Fill with manufactured sand where there is volume to fill. Dispense Mender from the self mixing cartridge or bulk mix.

02

Penetrates and locks

Viscosity under 9 cps and very low surface tension pull the polymer deep into the pore structure on both sides of the crack, forming thousands of micro dowels.

03

Cures. Back to work.

Cured in 10 minutes at 72°F. Grind flush, polish, coat or open to forklift and vehicle traffic the same hour. Cures in subzero rooms too.

IN THE FIELD

Crack and spall repair in the field.

DOT BRIDGE DECK CRACK REPAIR

WAREHOUSE FLOOR JOINTS

CARTRIDGE CRACK INJECTION

COLD STORAGE, NO THAW DOWN

CORE SAMPLE: FULL DEPTH PENETRATION

SIZES AND ACCESSORIES

Order what the job needs.

Cartridges for cracks and small repairs. Bulk kits for joints, spalls and large floor programs. We will help you size the order.

Roadware 10 Minute Concrete Mender 600 ml cartridge, item 80300

ITEM 80300

600 ml cartridge

300 x 300 self mixing cartridge with static mixer. The go to for cracks, spalls and joint edges.

Roadware 10 Minute Concrete Mender two gallon kit, item 80020

ITEM 80020

Two gallon kit

Part A and Part B for bucket mixing. Larger spalls, joint headers and floor programs.

Roadware 10 Minute Concrete Mender ten gallon kit, item 80050

ITEM 80050

Ten gallon kit

Bulk application for full depth injection and large scale deck and floor maintenance.

Dual cartridge dispensing gun and static mixer for Roadware 600 ml cartridges

TOOLS

Mixers, tips and guns

Static mixers, Luer Lok needle tips for hairline injection and dual cartridge dispensing guns.

Packaging photos courtesy of Roadware Incorporated. Final imagery to be confirmed with the client.

DOWNLOADS

Specs, safety and instructions.

PDF

Technical data sheet
Roadware 10 Minute Concrete Mender

SDS

PDF

PDF

Bulk application instructions
Roadware Incorporated

WEB

Manufacturer product page
concretemender.com

BEST USES

Do-it-yourself installation.
Professional-grade results.

An easy-to-use solution for contractors and facility maintenance teams. Prep with a wire brush, pour, add sand and scrape flush. These are the jobs it does best.

Warehouse and plant floors

Spalled joints, cracks and pop outs repaired between shifts. Forklifts back on it in about 10 minutes.

Bridge and DOT decks

Hairline crack and spall repair that stops water and salt at the deck. PennDOT Bulletin 15 approved.

Parking garage decks

Deck cracks, spalls and joint edges sealed before salt and water reach the steel.

Freezer and cold storage floors

Cures down to 20 below zero. Repair the floor with the room running and no thaw down.

Anchor bolts, equipment and railings

Set bolts, equipment and railings into concrete with a fast, structural bond.

Delaminated toppings and overlays

Inject hollow sounding toppings to rebond them to the base slab instead of tearing them out.

PRODUCT FAQ

Questions we get about Mender.

Can my own crew install it?

Yes. 10 Minute Concrete Mender is made for contractors and facility maintenance teams to install themselves. Most repairs take a wire brush, a dispensing gun and the right sand. Pour, add sand, scrape flush and the area is back in service in as little as 10 minutes. We walk your crew through prep and application by phone, and in the Pittsburgh region we can install it for you.

What size crack can Mender repair?

Will it work in my freezer without thawing it out?

Which product do I use if the joint moves?

How much do I need for 100 feet of joint?

Is it approved for PennDOT and other DOT work?

What sand do I use with Mender?

How much does a 600 ml cartridge cover?

ALSO FROM EXPRESS POLYMERS

Related products.

Roadware Flexible Cement II 600 ml cartridge

ROADWARE

Flexible Cement II

For joints and cracks that move. Stays flexible for life, tolerates moisture, works in asphalt and concrete.

Roadware MatchCrete Clear 600 ml cartridge

ROADWARE

MatchCrete™ Clear

Clear, UV stable repairs for decorative, polished and exposed aggregate concrete where looks matter.

SEE IT WORK

Watch the repair,
start to finish.

Two demonstrations from Roadware, the manufacturer. Express Polymers is the leading nationwide supplier of Concrete Mender and the crew that installs it in the Pittsburgh region, so these are the same steps we follow and the same steps we will walk your crew through by phone.

Crack repair. Cartridge pour into a floor crack, sanded and scraped flush. 3:44.

Spall repair, bulk kit. Mixed with sand in buckets, placed, ground flush. 6:39.

READY TO ORDER OR NEED IT INSTALLED?

Talk to someone who
has used it.

Quotes for contractors nationwide. Site visits across the Pittsburgh region.