A hydrophobic hybrid polyurethane for control joints, construction joints and cracks that experience movement. Combines with sand or aggregate to form a flexible, durable repair that stays pliable for the life of the repair, tolerates moisture, and works in concrete and asphalt. Ready for heavy traffic in 20 minutes.
Flexible Cement II is a flexible control joint filler and crack repair material made by Roadware Incorporated. It is a hydrophobic hybrid polyurethane that fills, bonds and stays flexible, so the repair rides with the movement of the slab instead of fighting it. Rigid patches in control joints and traffic lane cracks pop out. Flex II does not.
It is hydrophobic, so it tolerates small amounts of moisture that would defeat other materials. Surfaces should still be as clean and dry as practical. Mixed with sand it builds a durable, semi flexible fill for joint headers and spalled joint edges. Ready for heavy traffic in about 20 minutes at 72°F.
USES
Control joints and construction joints in warehouses, garages and plants
Cracks along traffic lanes where movement is expected
Spalled and distressed joint edges and headers
Asphalt cracks and asphalt to concrete transitions
Handrail and post installations that need a flexible set
Moisture prone slabs, freezers and containment areas
Technical data
Cure time @ 72°F
15 to 20 minutes
Solids
100%
VOC
Zero
Mixing ratio
1:1
Moisture tolerance
Hydrophobic, tolerates small amounts of moisture
Substrates
Concrete and asphalt
Flexibility
Remains flexible for life of repair
Traffic
Heavy traffic in about 20 minutes
Cured color
Gray
Application
Cartridge or bulk mix with sand
Source: Roadware Incorporated technical data. Always read the SDS and instructions before use. For professional use only.
Features
Hybrid polyurethane chemistry that stays flexible
Hydrophobic. Tolerates small amounts of moisture
Bonds to concrete and asphalt
Zero VOC and very low odor
Self mixing cartridge or bulk kit application
Cures fast, down to 20 below zero
Benefits
Joint repairs that do not pop out under movement
No downtime. Traffic in about 20 minutes
Works where moisture defeats epoxies
One product for concrete and asphalt
Safe for occupied indoor spaces
Stocked in Pittsburgh. Ships nationwide
HOW IT WORKS
Fill, bond and flex.
Flexible Cement II is built for the parts of a floor that never stop moving.
01
Prep the joint
Remove failed filler and loose material. Wire brush or saw cut the joint edges. Get the joint as clean and dry as you can.
02
Fill with sand and Flex II
Place sand where there is volume to fill, then dispense Flexible Cement II from the cartridge or bulk mix. It wets out the sand and bonds both walls.
03
Open to traffic
Trim flush in 15 to 20 minutes and open the lane. The repair stays flexible and rides with the slab.
Easy for your own crew to install from a cartridge or bucket mix, with no pump. Built for joints and cracks that move.
Control and construction joints
Saw cut and construction joints in warehouses, garages and plants that open and close with the slab.
Traffic lane cracks
Cracks along forklift and vehicle lanes where movement is expected. Heavy traffic in about 20 minutes.
Spalled joint edges and headers
Mix with sand to rebuild broken joint edges with a durable, semi flexible fill.
Asphalt cracks and transitions
Bonds to asphalt and concrete, so it handles asphalt cracks and asphalt to concrete transitions.
Damp and cold areas
Tolerates small amounts of moisture and cures down to 20 below. Freezers, docks and containment areas.
Handrails and posts
Set handrails and posts where the installation needs a flexible set.
PRODUCT FAQ
Questions we get about Flex II.
Flex II or Concrete Mender for my joint?
If the joint or crack moves, Flex II. If the concrete is stable and you want a rigid structural repair, Concrete Mender.
Can I use it on damp concrete?
It tolerates small amounts of moisture, which is more than epoxy or most polyureas will. Surfaces should still be as clean and dry as practical, with no standing water or frost.
Does it work in asphalt?
Yes. It bonds to asphalt and concrete, which makes it a good fit for transitions and asphalt cracks.
How soon can forklifts run on it?
About 20 minutes at 72°F. Trim it flush and open the lane.
Can my own crew install it?
Yes. Flexible Cement II goes in from a self mixing cartridge or a bucket mix with no pump, so most contractors and maintenance crews install it themselves. We walk your crew through it by phone. In the Pittsburgh region, we can also do the joint repair for you.
Is Flexible Cement II a polyurea?
No. It is a hybrid polyurethane. It gives you the fast set and cold weather cure contractors like in polyurea joint fillers, but it goes in from a cartridge or bucket mix with no pump, tolerates damp concrete and stays flexible for the life of the repair.
ALSO FROM EXPRESS POLYMERS
Related products.
ROADWARE 10 MINUTE
Concrete Mender™
The flagship. PennDOT Bulletin 15 approved structural repair for cracks, spalls and joints. Back to traffic in 10 minutes.